Tools and equipment – In this post, you can learn 60 English vocabulary items related to tools and equipment. There are names of common tools and equipment, example sentences, and photos.
Table of Contents
Tools and Equipment
List of Tools & Equipment
- Spirit level
- Chipping hammer
- Coping saw
- Paint roller
- Hand saw
- Paint bucket
- Utility knife
- Hack saw
- Tape measure
- Adjustable wrench
- Pipe wrench
- Wood plane
- Chain saw
- Cordless drill
- Electric drill
- C clamp
- Hard hat
Tools & Equipment | Examples & Photos
He drove in a nail with one stroke of the hammer.
Tap in place with the club hammer handle and check with a spirit level as work progresses.
There are many hand tools in my tool storage unit ( tool chest, toolbox).
Hunger feels like pincers, like the bite of crabs, it burns, burns, and has no fire.
The door was studded with brass nails.
A safety clip or retainer must be installed to prevent attachments, such as chisels on a chipping hammer, from being unintentionally shot from the barrel.
He made a few dabs at the fence with the paintbrush but didn’t really paint it.
The coping blade is designed to be used for cutting in tight spots or curved patterns, much as you would with a coping saw, only without the teeth.
The carpenter ran his ruler over the shed and sized it up at once.
Then his motorcade headed for the Sasha Bruce House, a facility for homeless teens, where he grabbed a paint roller and helped volunteers who were fixing up rooms.
If we fill the wheelbarrow with sand in the pit, it’s too heavy to lift out.
Before painting the wood, roughen the surface with sandpaper.
She carefully marked where the screws were to go.
I’ll need that screwdriver to loosen these screws.
With one swing of his ax, Paul felled twenty trees.
A rake is a garden tool like a big comb.
Men used to cut trees with a hand saw. But now, by using an electronic saw they can cut down a tree in only a few minutes.
Push the bradawl centrally through the keyhole.
Did he think that would work if she got him gloves and a rake and shovel?
He dipped the brush into the paint bucket.
He used a hammer and chisel to chip away at the wall.
The best way to remove this lever is to cut it off using a hack saw.
When you have guessed all these, get a tape measure and find the real sizes.
You can’t climb the ladder of success with your hands in the pockets.
The bolts can only be released with a wrench.
Take the time to get a stepladder or stepstool.
After resorting in vain to screwdrivers and pliers, I decided to call a locksmith shop.
Nuts and bolts are used to hold pieces of machinery together.
Ensure that the frame is securely fixed to the ground with bolts.
Use an adjustable wrench or crescent wrench to disconnect flare fittings.
Can I just borrow the scissors for a second?
She depressed the plunger fully and pulled out the shot.
The clumsiness of power spoils the key and uses the pickaxe.
Catch it before it falls in the water. Unscrew the end cap using pliers and remove the washer.
A corkscrew is a very useful gadget for opening bottles of wine.
A backsaw consists of a straight blade, 8 in. to 14 in. long, bolted to a wood handle.
It can be removed by simply unscrewing with a large pipe wrench.
He took his pocketknife and in the big oak made a groove.
He had a chain saw and loppers. I brought along gloves and a curved pruning saw.
Using a scraper to remove wallpaper can be very time-consuming.
We need an electric drill to do this work.
Preflushing machine, the related auxiliary device of fretsaw, is applied to the preflushing for stripping after cutting silicon chip…
You should never join an electric wire to a water pipe.
You’ll need a spanner to loosen that bolt.
Tools & Equipment | Infographic
Names of Tools & Equipment in English